Search found 327 matches
- Sun Mar 23, 2014 11:56 am
- Forum: SCCA Classifieds
- Topic: FS: 1991 Eagle Talon TSi AWD
- Replies: 0
- Views: 2094
FS: 1991 Eagle Talon TSi AWD
1991 Eagle Talon TSi AWD Currently set up well within the limits of Street Prepared. Still runs strong, doesn't smoke, use oil or leave any puddles. It is missing most of its clear coat and some of the trim pieces have come off the outside of the drivers door. It will needs tires before it can be dr...
- Sun Mar 31, 2013 7:59 pm
- Forum: SCCA Classifieds
- Topic: RX7 Road Race Car-ITA/IT7
- Replies: 0
- Views: 1891
RX7 Road Race Car-ITA/IT7
1984 Mazda RX7 built about as far as you can go in IT. G-Force tri-link, turn in spacers, pan hard bar, camber caster plates, ISC lower control arms, on board fire suppression, 22 gal fuel cell, Howe aluminum radiator, 2nd gen oil cooler. Possible spares package available. The pictures are from the ...
- Fri Nov 16, 2012 8:43 pm
- Forum: SCCA Classifieds
- Topic: Longacre Alignment Tools
- Replies: 0
- Views: 1243
Longacre Alignment Tools
All of these are in like new condition.
Camber/Caster Gauge with case without adapter, item # 78250
$70
Quickset adapter for Camber/Caster Gauge, item # 78428
$75
Tire Scribe, item # 79610
$45
Toe-in Gauge, item # 79620 (this does have some minor wear marks from being assembled/disassembled)
$70
Camber/Caster Gauge with case without adapter, item # 78250
$70
Quickset adapter for Camber/Caster Gauge, item # 78428
$75
Tire Scribe, item # 79610
$45
Toe-in Gauge, item # 79620 (this does have some minor wear marks from being assembled/disassembled)
$70
- Thu Sep 06, 2012 9:08 pm
- Forum: SCCA Classifieds
- Topic: 2.5" Eibach Springs
- Replies: 0
- Views: 1244
2.5" Eibach Springs
I have two pairs of Eibach springs from Ground Control
First pair: GC150.64.66 (6" x 2.5" x ~370 lb/in)
Second pair: GC180.64.44 (7" x 2.5" x ~250 lb/in)
$60/pair
First pair: GC150.64.66 (6" x 2.5" x ~370 lb/in)
Second pair: GC180.64.44 (7" x 2.5" x ~250 lb/in)
$60/pair
- Sun Aug 12, 2012 8:05 pm
- Forum: SCCA Classifieds
- Topic: Longacre Accutech Economy Pyrometer
- Replies: 2
- Views: 1737
Re: Longacre Accutech Economy Pyrometer
I won't be attending the next event, but I should be able to meet up at it.
- Sun Aug 12, 2012 4:20 pm
- Forum: SCCA Classifieds
- Topic: Longacre Accutech Economy Pyrometer
- Replies: 2
- Views: 1737
Longacre Accutech Economy Pyrometer
Has only been used a few times. Asking $80.
- Wed Nov 30, 2011 8:29 pm
- Forum: SCCA General Discussion
- Topic: RX-8 and such....
- Replies: 19
- Views: 4486
Re: RX-8 and such....
Too many cars and this one is too nice to sit all week and gets too poor fuel mileage to drive all week.
- Wed Nov 30, 2011 8:15 pm
- Forum: SCCA General Discussion
- Topic: RX-8 and such....
- Replies: 19
- Views: 4486
Re: RX-8 and such....
From what I recall, there isn't much difference weight wise between the base and the sport. Any higher package will have a sunroof. I think the 06's also gained some weight. I've also heard but don't know that they had a lot of issues worked out with the 05's. Of course I may be a little biased sinc...
- Mon Nov 28, 2011 9:57 pm
- Forum: SCCA Classifieds
- Topic: Glock 19
- Replies: 5
- Views: 2609
Re: Glock 19
I'm open to offers.
- Sun Nov 27, 2011 6:00 pm
- Forum: SCCA Classifieds
- Topic: Glock 19
- Replies: 5
- Views: 2609
Glock 19
Glock 19 Gen 3 purchased new 2 years ago. Less than 600 rounds through it. Includes everything that came with it when new. $475 Also available: Raven Concealment Phantom Light compatible holster with IWB and OWB loops-$80 (will only sale with or after gun sales) Streamlight TLR-1 - $80 (will only sa...
- Mon Aug 08, 2011 4:50 pm
- Forum: SCCA Classifieds
- Topic: WTB: 6.5 Diesel Exhaust Manifold
- Replies: 4
- Views: 2451
Re: WTB: 6.5 Diesel Exhaust Manifold
Thanks Terry.
- Sat Aug 06, 2011 3:07 pm
- Forum: SCCA Classifieds
- Topic: WTB: 6.5 Diesel Exhaust Manifold
- Replies: 4
- Views: 2451
WTB: 6.5 Diesel Exhaust Manifold
I am having no luck finding one of these, so if anyone knows where a parts truck/engine is let me know. I need one for the drivers side. Can be from a turbo or non turbo truck 1995 and older. Needs to be from a truck. The vans and hummers used a different manifold.
- Sat Mar 12, 2011 7:35 am
- Forum: SCCA Classifieds
- Topic: FS: Stock RX8 Wheels
- Replies: 0
- Views: 949
FS: Stock RX8 Wheels
Complete set of stock 18x8 wheels. They have a fair amount of curb rash and I only used them for autox. May also make a good set of winter wheels. When I got my tires mounted they told me one was slightly warped, but I could never notice it at autox speeds. $250
- Wed Mar 09, 2011 6:02 pm
- Forum: SCCA General Discussion
- Topic: Questions for the RX8 Experts
- Replies: 12
- Views: 2789
Re: Questions for the RX8 Experts
I don't remember all the details, but when I was looking for mine I decided to avoid the 04s. It seemed like most of the issues were worked out by 05. Maybe with the new engine comes all the fixes. I've put about 20k miles on mine in a year and a half with no problems. I mostly just looked for one t...
- Sun Dec 05, 2010 6:49 pm
- Forum: SCCA Classifieds
- Topic: WTB stock RX8 Wheels.
- Replies: 1
- Views: 1192
Re: WTB stock RX8 Wheels.
I do. PM sent.