Fastrack News November
Fastrack News November
Check it out lot's of street class changes for 2017
Paul Breitweiser
2016 STX Champion FRS Raven Black
2016 STX Champion FRS Raven Black
Re: Fastrack News November
Hey look, now we can't protest McCrary's RX8
The SEB recommends the addition of a new paragraph to 13.1, as follows:
“Front bumpers, rear bumpers, body trim pieces and attachment points may be reinforced to prevent or repair
damage from hitting cones. Reinforcements that are not visible to the exterior of the car are allowed. Such
repairs and/or reinforcements may serve no other purpose.”
The SEB recommends the addition of a new paragraph to 13.1, as follows:
“Front bumpers, rear bumpers, body trim pieces and attachment points may be reinforced to prevent or repair
damage from hitting cones. Reinforcements that are not visible to the exterior of the car are allowed. Such
repairs and/or reinforcements may serve no other purpose.”
Chris Harp
2009 Mazda RX-8 | 2018 Toyota Tundra | 2011 BMW M3
2009 Mazda RX-8 | 2018 Toyota Tundra | 2011 BMW M3
Re: Fastrack News November
Marcus Luttrell - 99' Miata - GLTC/Max3/ST5 #92
Nine Lives Racing - Sales/spell-checker/IT
Nine Lives Racing - Sales/spell-checker/IT
Re: RE: Re: Fastrack News November
Interpretation: The SEB recommends filling all front bumpers with concrete to avoid damaging them in the event of an impact. Make the cones pay.thrdeye wrote:Hey look, now we can't protest McCrary's RX8
The SEB recommends the addition of a new paragraph to 13.1, as follows:
“Front bumpers, rear bumpers, body trim pieces and attachment points may be reinforced to prevent or repair
damage from hitting cones. Reinforcements that are not visible to the exterior of the car are allowed. Such
repairs and/or reinforcements may serve no other purpose.”
Sent from my SM-G930P using Tapatalk
Mark Pilson
03 Z06 - Sword
09 Mustang - Club
01 Excursion - The safe you dropped from the 10th story
03 Z06 - Sword
09 Mustang - Club
01 Excursion - The safe you dropped from the 10th story
Re: RE: Re: Fastrack News November
Man...... I would of been hurting pretty damn bad if the front bumper of my Z was filled with concrete when I had it at Road Atlanta.......MARKP wrote:Interpretation: The SEB recommends filling all front bumpers with concrete to avoid damaging them in the event of an impact. Make the cones pay.thrdeye wrote:Hey look, now we can't protest McCrary's RX8
The SEB recommends the addition of a new paragraph to 13.1, as follows:
“Front bumpers, rear bumpers, body trim pieces and attachment points may be reinforced to prevent or repair
damage from hitting cones. Reinforcements that are not visible to the exterior of the car are allowed. Such
repairs and/or reinforcements may serve no other purpose.”
Sent from my SM-G930P using Tapatalk
Marcus Luttrell - 99' Miata - GLTC/Max3/ST5 #92
Nine Lives Racing - Sales/spell-checker/IT
Nine Lives Racing - Sales/spell-checker/IT
Re: Fastrack News November
You shouldn't be running an autocross car at the track.
Sent from my SM-G930P using Tapatalk
Sent from my SM-G930P using Tapatalk
Mark Pilson
03 Z06 - Sword
09 Mustang - Club
01 Excursion - The safe you dropped from the 10th story
03 Z06 - Sword
09 Mustang - Club
01 Excursion - The safe you dropped from the 10th story
-
- Posts: 8798
- Joined: Fri Dec 05, 2003 11:05 am
Re: Fastrack News November
Damm Luttrell..... didnt you have in car video running when you did that??
ETR Pro Class Champion-2002-03-10-11-12-13-14-15
BMW/CCA D-Mod National Road Racing Champion-2011
Pro-Solo Prepared National Champ-2004
Pro-Solo Prepared National Champ-2005
2016 Dodge Challenger SRT 6.4L CAM-C
BMW/CCA D-Mod National Road Racing Champion-2011
Pro-Solo Prepared National Champ-2004
Pro-Solo Prepared National Champ-2005
2016 Dodge Challenger SRT 6.4L CAM-C
Re: Fastrack News November
heh, no new bodywork rule for A-mod:
#19119 response to letter #17810 (cockpit bodywork)
The SEB is recommending the following changes to 18.4.A and 18.4.B:
A. Bodywork
“1. Any bodywork used must be made of metal, fiberglass, or other suitable fire resistant materials. Body panels are not required
except as specified in section 18.4.A.3.”
B. Chassis
“14. The sides, front, and back of the cockpit area must be at least as high as the driver’s waist.”
#19119 response to letter #17810 (cockpit bodywork)
The SEB is recommending the following changes to 18.4.A and 18.4.B:
A. Bodywork
“1. Any bodywork used must be made of metal, fiberglass, or other suitable fire resistant materials. Body panels are not required
except as specified in section 18.4.A.3.”
B. Chassis
“14. The sides, front, and back of the cockpit area must be at least as high as the driver’s waist.”
Mike Kelly
"Still got the shovel..."
--Mr. Rate
"Still got the shovel..."
--Mr. Rate
Re: Fastrack News November
My 2nd letter worked 2013 to 2016 NON TRD Twin from CS to DS
Paul Breitweiser
2016 STX Champion FRS Raven Black
2016 STX Champion FRS Raven Black
Re: Fastrack News November
negative..... thank god, lolJohn Brown wrote:Damm Luttrell..... didnt you have in car video running when you did that??
Marcus Luttrell - 99' Miata - GLTC/Max3/ST5 #92
Nine Lives Racing - Sales/spell-checker/IT
Nine Lives Racing - Sales/spell-checker/IT