Driver fit check assist?
-
- Posts: 136
- Joined: Sun May 09, 2004 11:03 am
- Location: Knoxville
Driver fit check assist?
I have a potential driver/car purchase individual in NJ that I am trying to find a local sports car driver / Solo driver type that could simulate fitting into my car before he travels to Knoxville. His stature is 6'-0 approx, 230#, (don't have inseam yet-requested), so someone in that approx build. Current cockpit set up is adjustable 16" W aluminum seat on adj track/seat back support, seat low mounted to floor. The reason the request for a sports car driver type is so some understanding of seated operational requirements and expectations already exists, if that make sense. Mods can always be made, just trying to determine if we are close in current configuration. Thanks in advance.
Joe Henslee
Henslee Scorpion 2.0L Ford BSR-U2 CanAm (vintage) / Prototype 2 (SCCA) / BM(Solo)
Zink Z10 FF / CF (SCCA &vintage) / CM(Solo)
Reynard SF-84 2.0L Ford, Formula Continental FC / CFC (SCCA) / Formula Libre' (vintage)
USDRRT on eBay ....
Henslee Scorpion 2.0L Ford BSR-U2 CanAm (vintage) / Prototype 2 (SCCA) / BM(Solo)
Zink Z10 FF / CF (SCCA &vintage) / CM(Solo)
Reynard SF-84 2.0L Ford, Formula Continental FC / CFC (SCCA) / Formula Libre' (vintage)
USDRRT on eBay ....
Re: Driver fit check assist?
I'm 6-2, 255
I would be glad to help but I have always had a problem with race seats and I only fit in the big ones.
I would be glad to help but I have always had a problem with race seats and I only fit in the big ones.
Chris Harp
2009 Mazda RX-8 | 2018 Toyota Tundra | 2011 BMW M3
2009 Mazda RX-8 | 2018 Toyota Tundra | 2011 BMW M3
-
- Posts: 136
- Joined: Sun May 09, 2004 11:03 am
- Location: Knoxville
Re: Driver fit check assist?
I'm game if you are. Will pull the upholstery so the entry / exit will be smooth. Thanks for responding.
Joe Henslee
Henslee Scorpion 2.0L Ford BSR-U2 CanAm (vintage) / Prototype 2 (SCCA) / BM(Solo)
Zink Z10 FF / CF (SCCA &vintage) / CM(Solo)
Reynard SF-84 2.0L Ford, Formula Continental FC / CFC (SCCA) / Formula Libre' (vintage)
USDRRT on eBay ....
Henslee Scorpion 2.0L Ford BSR-U2 CanAm (vintage) / Prototype 2 (SCCA) / BM(Solo)
Zink Z10 FF / CF (SCCA &vintage) / CM(Solo)
Reynard SF-84 2.0L Ford, Formula Continental FC / CFC (SCCA) / Formula Libre' (vintage)
USDRRT on eBay ....
Re: Driver fit check assist?
Joe...I don't know if I'm qualified for what you're looking for 5' 10" 220 lbs just wanted you to know I'm always open to helping if I can.....I am from NJ if that helps
Paul Breitweiser
2016 STX Champion FRS Raven Black
2016 STX Champion FRS Raven Black
Re: Driver fit check assist?
5' 11" here and roughly 210. Let me know if you need me.
Sent from my SPH-L710 using Tapatalk
Sent from my SPH-L710 using Tapatalk
Mark Pilson
03 Z06 - Sword
09 Mustang - Club
01 Excursion - The safe you dropped from the 10th story
03 Z06 - Sword
09 Mustang - Club
01 Excursion - The safe you dropped from the 10th story
-
- Posts: 136
- Joined: Sun May 09, 2004 11:03 am
- Location: Knoxville
Re: Driver fit check assist?
Paul and Mark,
You are both welcomed to come over and would provide a good feel for my interested buyer. Mark I know you have my ph#...Paul, I will PM you
Thank you so much for the offers.
You are both welcomed to come over and would provide a good feel for my interested buyer. Mark I know you have my ph#...Paul, I will PM you
Thank you so much for the offers.
Joe Henslee
Henslee Scorpion 2.0L Ford BSR-U2 CanAm (vintage) / Prototype 2 (SCCA) / BM(Solo)
Zink Z10 FF / CF (SCCA &vintage) / CM(Solo)
Reynard SF-84 2.0L Ford, Formula Continental FC / CFC (SCCA) / Formula Libre' (vintage)
USDRRT on eBay ....
Henslee Scorpion 2.0L Ford BSR-U2 CanAm (vintage) / Prototype 2 (SCCA) / BM(Solo)
Zink Z10 FF / CF (SCCA &vintage) / CM(Solo)
Reynard SF-84 2.0L Ford, Formula Continental FC / CFC (SCCA) / Formula Libre' (vintage)
USDRRT on eBay ....