2x 225/45/16 ZII's - Both with about 3/32" tread. One has a large slash (not usable, but holds air)
- Free if you pick them up in Alcoa
VW Parts - 2x CV axles, 2x hubs, 2x wheel bearings. Purchased in 2008 for another project that never really happened. New in box. Confirm your own fitment based on part number. Should fit several late 80's or early 90's FWD VW's.
- Make an offer on what parts you want. Ted, you've already got dibs. Pick up in Alcoa.
- 99-04 Ford F-150 head unit and CD changer If they don't work, talk to Jon Coatney.
Free for pick up in Alcoa.
- Kenwood speaker box with speakers. No idea if or how well it works. Probably came with a car that I bought.
Free for pick up in Alcoa.
- Blaupunkt amp and Kenwood 10" sub Was in my Lightning when I bought it. Has little bit of white noise at low volume.
$50 OBO for what's in the picture. Pick up in Alcoa.
4x 17" x 7.5" +45mm Kosei K1 One was cracked and has been repaired with TIG welding. Ready for paint of powdercoat. One came loose while on track and attached to the KnoxVegas Lowballers LeMons Contour at CMP. One has a small flat spot, but holds air.
$75 OBO for them all or make an offer for individuals
Garage Clean-Out (nearly free)
- TennTechMan
- Posts: 1851
- Joined: Wed Mar 19, 2008 9:50 pm
- Location: Maryville, TN
Garage Clean-Out (nearly free)
Aaron Carroll
STM 11 - 91 Geo Metro
Lead Engineer of the Knoxvegas Lowballers
STM 11 - 91 Geo Metro
Lead Engineer of the Knoxvegas Lowballers
-
- Posts: 119
- Joined: Sat Sep 28, 2013 5:57 pm
Re: Garage Clean-Out (nearly free)
Is ted taking the VW parts. I will check. They may fit my Amod and I need new bearings too.
*Chad Summey*
E mod 78 lotus seven clone.
E mod 78 lotus seven clone.
- TennTechMan
- Posts: 1851
- Joined: Wed Mar 19, 2008 9:50 pm
- Location: Maryville, TN
Re: Garage Clean-Out (nearly free)
Sub/Amp are gone.
I only say Ted has dibs because I'm pretty sure he helped me spec out the part numbers. He may not even know this stuff is posted here yet.
I only say Ted has dibs because I'm pretty sure he helped me spec out the part numbers. He may not even know this stuff is posted here yet.
Aaron Carroll
STM 11 - 91 Geo Metro
Lead Engineer of the Knoxvegas Lowballers
STM 11 - 91 Geo Metro
Lead Engineer of the Knoxvegas Lowballers
Re: Garage Clean-Out (nearly free)
Hubs (mmmmmm German steel...mmmmm) and bearings (Canadian is good enough, eh?) fit MK1 VW which is all up to 84, then Scirocco 8V and Cabriolet up to 1988 and 1993ish
The axles fit 85 to 92 8Valve VW Scirocco, Jetta, Golf on the left side.
I have too much going on now to figure out if I need these. If someone else can use em, have at em.
Thanks for the dibs tho.
The axles fit 85 to 92 8Valve VW Scirocco, Jetta, Golf on the left side.
I have too much going on now to figure out if I need these. If someone else can use em, have at em.
Thanks for the dibs tho.
Ted V.
don't make me list all my VW's
don't make me list all my VW's