Garage Clean-Out (nearly free)

Items Wanted, Forsale, or For Trade
Post Reply
User avatar
TennTechMan
Posts: 1851
Joined: Wed Mar 19, 2008 9:50 pm
Location: Maryville, TN

Garage Clean-Out (nearly free)

Post by TennTechMan »

2x 225/45/16 ZII's - Both with about 3/32" tread. One has a large slash (not usable, but holds air)

- Free if you pick them up in Alcoa

Image



VW Parts - 2x CV axles, 2x hubs, 2x wheel bearings. Purchased in 2008 for another project that never really happened. New in box. Confirm your own fitment based on part number. Should fit several late 80's or early 90's FWD VW's.

- Make an offer on what parts you want. Ted, you've already got dibs. Pick up in Alcoa.

Image

Image

Image


- 99-04 Ford F-150 head unit and CD changer If they don't work, talk to Jon Coatney.

Free for pick up in Alcoa.

Image

Image

Image


- Kenwood speaker box with speakers. No idea if or how well it works. Probably came with a car that I bought.

Free for pick up in Alcoa.

Image


- Blaupunkt amp and Kenwood 10" sub Was in my Lightning when I bought it. Has little bit of white noise at low volume.

$50 OBO for what's in the picture.
Pick up in Alcoa.

Image

Image


4x 17" x 7.5" +45mm Kosei K1 One was cracked and has been repaired with TIG welding. Ready for paint of powdercoat. One came loose while on track and attached to the KnoxVegas Lowballers LeMons Contour at CMP. One has a small flat spot, but holds air.

$75 OBO for them all or make an offer for individuals

Image

Image

Image

Image

Image
Aaron Carroll

STM 11 - 91 Geo Metro
Lead Engineer of the Knoxvegas Lowballers
72RatCamaro
Posts: 119
Joined: Sat Sep 28, 2013 5:57 pm

Re: Garage Clean-Out (nearly free)

Post by 72RatCamaro »

I will take sub and amp combo. PM sent
Andrew Hodge
User avatar
thewelder
Posts: 921
Joined: Fri Jan 02, 2004 9:52 am
Location: kingsport tn/

Re: Garage Clean-Out (nearly free)

Post by thewelder »

Is ted taking the VW parts. I will check. They may fit my Amod and I need new bearings too.
*Chad Summey*

E mod 78 lotus seven clone.
User avatar
TennTechMan
Posts: 1851
Joined: Wed Mar 19, 2008 9:50 pm
Location: Maryville, TN

Re: Garage Clean-Out (nearly free)

Post by TennTechMan »

Sub/Amp are gone.

I only say Ted has dibs because I'm pretty sure he helped me spec out the part numbers. He may not even know this stuff is posted here yet.
Aaron Carroll

STM 11 - 91 Geo Metro
Lead Engineer of the Knoxvegas Lowballers
TedV
Posts: 6217
Joined: Wed Dec 17, 2003 5:55 pm

Re: Garage Clean-Out (nearly free)

Post by TedV »

Hubs (mmmmmm German steel...mmmmm) and bearings (Canadian is good enough, eh?) fit MK1 VW which is all up to 84, then Scirocco 8V and Cabriolet up to 1988 and 1993ish

The axles fit 85 to 92 8Valve VW Scirocco, Jetta, Golf on the left side.


I have too much going on now to figure out if I need these. If someone else can use em, have at em.
Thanks for the dibs tho. :rockon:
Ted V.
don't make me list all my VW's
Post Reply