Amod project "sold"

Items Wanted, Forsale, or For Trade
Post Reply
User avatar
thewelder
Posts: 921
Joined: Fri Jan 02, 2004 9:52 am
Location: kingsport tn/

Amod project "sold"

Post by thewelder »

Started life as a FSAE car with a 93 GSXR 600 engine. I bought it from the team after it had sat for over ten years. I got it running and ran it for two years with little problems.
I came across what was left of Grassroots Motorsports project berzerkeley for a great price.
So I torn down there car for parts. I also torn into me car for a motor swap. A simple motor swap snowballed into a full redesign.
So what you get is a 73" wheel base chassis. Track is 51" rear and 50.5" front. Overall width is 61.625 rear and 60.5 front. Wilwood brakes, pro shocks, torsion diff. Custom up rights. 5x100 rear lug pattern and 5x4.5 front. Keiser wheel with old tire that are in good shape( hard by now). 13x10.5 rear and 13x9.5 fronts
Motor is a low mileage 03 GSXR 750. Converted to dry sump by me. Never ran by me. I have primed the oil system with the starter after the install. Not wired yet. I have GRM full harness and another one. I also have a powercommander 3 that came with it. , a new set of JE 1000 pistons, and most of a turbo kit(turbo, intercooler, BOV, and enough piping to make a manifold.
The car has paddle shifting that is ready to go. Gas paddle and clutch are all hooked up. All it needs to fire up is wiring and water lines. That's it. Located in east TN. I will send picks to anyone interested. $2800 OBO. I just hate to see it parted out. I have too much time in it and it's so close to being done. I am about to start parted it out unless someone is interested. I need the room. Call or text 4two3-3eight4-2five0eight or chad(dot)summey(at)yahoo(dot)com
Thanks
Image
Image
Image
Image
Image
Image
Last edited by thewelder on Sat Jul 02, 2016 9:10 pm, edited 2 times in total.
*Chad Summey*

E mod 78 lotus seven clone.
thrdeye
Posts: 14085
Joined: Fri Dec 05, 2003 12:31 pm
Location: Lenoir City

Re: Amod project

Post by thrdeye »

Looks like an STM car to me :D
Chris Harp
2009 Mazda RX-8 | 2018 Toyota Tundra | 2011 BMW M3
User avatar
thewelder
Posts: 921
Joined: Fri Jan 02, 2004 9:52 am
Location: kingsport tn/

Re: Amod project

Post by thewelder »

It would be a handful on 200tw tires. But a fun handful.
*Chad Summey*

E mod 78 lotus seven clone.
thrdeye
Posts: 14085
Joined: Fri Dec 05, 2003 12:31 pm
Location: Lenoir City

Re: Amod project

Post by thrdeye »

thewelder wrote:But a fun handful.
That's all you can ask for. :)
Chris Harp
2009 Mazda RX-8 | 2018 Toyota Tundra | 2011 BMW M3
joe henslee
Posts: 136
Joined: Sun May 09, 2004 11:03 am
Location: Knoxville

Re: Amod project

Post by joe henslee »

Not trying to hijack your thread, but I've been having the same thoughts....... :mrgreen: :mrgreen: :mrgreen: ...... mummmmm :wink:
Good luck with your sale on your A-Mod

Image
Joe Henslee
Henslee Scorpion 2.0L Ford BSR-U2 CanAm (vintage) / Prototype 2 (SCCA) / BM(Solo)
Zink Z10 FF / CF (SCCA &vintage) / CM(Solo)
Reynard SF-84 2.0L Ford, Formula Continental FC / CFC (SCCA) / Formula Libre' (vintage)
USDRRT on eBay ....
User avatar
thewelder
Posts: 921
Joined: Fri Jan 02, 2004 9:52 am
Location: kingsport tn/

Re: Amod project (price drop)

Post by thewelder »

I sold the spare motors so I lowered the price.
*Chad Summey*

E mod 78 lotus seven clone.
User avatar
thewelder
Posts: 921
Joined: Fri Jan 02, 2004 9:52 am
Location: kingsport tn/

Re: Amod project (price drop)

Post by thewelder »

Might trade for a motorcycle. No cruiser. Thanks.
*Chad Summey*

E mod 78 lotus seven clone.
SeanDrives4Fun
Posts: 380
Joined: Thu Feb 09, 2012 7:15 pm
Location: Loudon, Tennessee
Contact:

Re: Amod project (price drop)

Post by SeanDrives4Fun »

Rally Boss
Post Reply