help with harness

[J306SPD]

I'M HAVING THE hardest time with the 3 point harness install. I can't find how to wrap the stupid brackets. Shoot me ideas if you know or have any please let me know. I've searched on different sites.





I need the right way to connect these.

[CabotTeg118]

http://www.gforce.com/pdf/Harness_Install_Info.pdf



Hope that helps!

[J306SPD]

Thanks but I mean these brackets. They come in two peices and need to be connected using the bracket that i posted in my original post

[CabotTeg118]

Mine just loop through one time.

[whenry]

Done it many times but hard to describe. You wrap the belt back onto itself. If it aint real tight, it aint right. Ask Dale Sr.

[J306SPD]

Finally I dont feel completly lost. It seems complicated. Can u draw a picture of the steps? Whos dale?

Thanks

[CabotTeg118]

Nothing complicated. On mine the strap that runs to the mounting location in stitched to the bracket. The part the runs to the buckle loops through the bracket leaving some extra belt dangling down (which is what you use to tighten the belt). Like this...

[J306SPD]

Ok thanks. haha i made it way to complicated

My 1st event will be early begining of july. I am excited

[MikeKelly]

Whos dale?

You ain't from around here, err ya?

[TedV]

Nascrap driver who never wore his safety gear right, went to intimidatingly block someone, got spun into the wall like he spun people his whole career, killed em. Now we have mandated head and neck restraints and softer walls to crash into.

[MikeKelly]

Nascrap driver who never wore his safety gear right, went to intimidatingly block someone, got spun into the wall like he spun people his whole career, killed em. Now we have mandated head and neck restraints and softer walls to crash into so the (insert appropriate slur / smear here, then strikeout) new breed of Cup driver can't hurt themselves, no matter how often they run out of talent or ability.

Fixed it, partially.

[whenry]

Cabot has the correct drawing. Once or twice I have had to open up the bracket a little to make it all fit. Having tested belts on more than one occasion, you want them done right.

[J306SPD]

Thanks everyone for the help. Definitely making progress

I'm swapping ECUs and harness out this week.



Please feel free to shoot me comments and concerns on the harness setup. I had to wrap the e slack around the harness bar but the harness is bolted In safe harness bill zones

[thrdeye]

Will the car be driven on the street?

[J306SPD]

Yes. As little as possible. Let me know if somthing needs to be tweaked , thanks

im going to take out the passenger seat also