Worker check-in for 6/26

ke0ki2k · Post by **ke0ki2k** » Fri Jun 17, 2011 7:13 pm

if anyone wants a co-driver to pay entry fees, i'll work (screw up) timing if need be.

CapnSlow45 · Post by **CapnSlow45** » Fri Jun 17, 2011 7:42 pm

I can be available for teardown or I could help out with / learn about registration. If you need someone on the mike calling out times, I enjoyed trying to do that at the last event.
Jason Crouch

TennTechMan · Post by **TennTechMan** » Fri Jun 17, 2011 8:22 pm

steverife wrote:though I may be without a ride.

Need a ride to the event? Or something to drive? If the CRX isn't ready, we could drive the Focus.

sentrase · Post by **sentrase** » Fri Jun 17, 2011 8:47 pm

Are you guys waiting on parts? Was anything else worn besides the white bushing?

steverife · Post by **steverife** » Fri Jun 17, 2011 8:57 pm

Yeah, took the rack out Tuesday, then placed an order to Majestic, but didn't get a tracking # until tonight. Figure one night to get everything buttoned up and one night to align the car.

The bushing was the only thing that was obviously bad. Once we took the wheel off, we could easily move the tie rod up and down.

onebadbugeye · Post by **onebadbugeye** » Sat Jun 18, 2011 7:13 am

I could help with tech or I would not mind learning registration. let me know which you need help with the most

NEVRLIFTLIN · Post by **NEVRLIFTLIN** » Sat Jun 18, 2011 8:08 am

EliseAutoXr wrote:I can help with registration (or anything that needs help)

Great to see you coming back!

MikeKelly · Post by **MikeKelly** » Sat Jun 18, 2011 1:40 pm

I think I'll try my hand at timing.

Mike

Post by **thrdeye** » Sat Jun 18, 2011 4:02 pm

MikeKelly wrote:I think I'll try my hand at timing.

Mike

Mike, have you done it before?

Post by **thrdeye** » Sat Jun 18, 2011 4:10 pm

CapnSlow45 wrote:I can be available for teardown or I could help out with / learn about registration. If you need someone on the mike calling out times, I enjoyed trying to do that at the last event.
Jason Crouch

Jason, sorry, I don't recall....are you an SCCA member?

Post by **thrdeye** » Sat Jun 18, 2011 4:16 pm

Updated the first post. All of you that want to learn....let's do it. It will be your work assignment.

MikeKelly · Post by **MikeKelly** » Sat Jun 18, 2011 4:17 pm

thrdeye wrote:Mike, have you done it before?

Yes, about 1985.

Obviously it was not a Windows based system, but I think I can probably pick it up without causing much grief... (no, ETR was not using stopwatches in 1985...

)

Otherwise, I can run cones and pick up as usual.

Mike

Post by **thrdeye** » Sat Jun 18, 2011 5:05 pm

MikeKelly wrote:
thrdeye wrote:Mike, have you done it before?

Yes, about 1985.

Obviously it was not a Windows based system, but I think I can probably pick it up without causing much grief... (no, ETR was not using stopwatches in 1985...)

Otherwise, I can run cones and pick up as usual.

Mike

I put ya down as a trainee!

backpacker6 · Post by **backpacker6** » Sat Jun 18, 2011 6:59 pm

I've been doing tech but I'll do whatever I guess.

oldmuscle69 · Post by **oldmuscle69** » Sun Jun 19, 2011 5:21 pm

I'm in for set up,did you find out if Jason Crouch is a member or not? He did a great job for his first time at last event as announcer.

East Tennessee Region SCCA

Worker check-in for 6/26

Re: Worker check-in for 6/26

Re: Worker check-in for 6/26

Re: Worker check-in for 6/26

Re: Worker check-in for 6/26

Re: Worker check-in for 6/26

Re: Worker check-in for 6/26

Re: Worker check-in for 6/26

Re: Worker check-in for 6/26

Re: Worker check-in for 6/26

Re: Worker check-in for 6/26

Re: Worker check-in for 6/26

Re: Worker check-in for 6/26

Re: Worker check-in for 6/26

Re: Worker check-in for 6/26

Re: Worker check-in for 6/26