Page 1 of 1

Need CAM class info

Posted: Thu Jun 02, 2016 1:32 pm
by Slick68
OK, I've searched and came seem to come up with a clarification of the differences in the CAM classes. I see there's T-Traditional, C-Contemporary, and S-Sport. What the differences in the classifications of each?

I'm trying to register for the June 5th event at Bristol. I've never run my truck at an SCCA Solo event, so I'm unsure what to register in.

The vehicle in question is a 68 Chevy C10 truck.

Image

Re: Need CAM class info

Posted: Thu Jun 02, 2016 2:02 pm
by MikeKelly

Re: Need CAM class info

Posted: Thu Jun 02, 2016 3:00 pm
by Gen52SS
Yeah CAM -S looks like my stepside nice truck

Re: Need CAM class info

Posted: Thu Jun 02, 2016 3:02 pm
by dewittpayne
Nope, CAM-C.
Sedans/coupes with seating originally for 4 or more adults or pick-ups

Re: Need CAM class info

Posted: Thu Jun 02, 2016 3:12 pm
by jcox07
Cam C is 1990 and on for all cars/trucks any car/truck prior to that is in Cam T or Cam S.

Re: Need CAM class info

Posted: Thu Jun 02, 2016 3:27 pm
by Gen52SS
CAM-T depending on if any changes were made to the braking system. ..CAM-C is for newer cars right seems like we were down this road before.

Re: Need CAM class info

Posted: Thu Jun 02, 2016 3:39 pm
by Mincharlie
Cam-s, look up 2016 scca cam rules, shows pick-ups under the S class

Re: Need CAM class info

Posted: Thu Jun 02, 2016 3:49 pm
by Slick68
I'm still running lowered stock suspension with factory sway bar and stock style brakes with aggressive Hawk pads. I am running an LS1 engine with 700R4 auto trans.

That's where I was getting confused is if I should be in CAM-T or CAM-S.

Re: Need CAM class info

Posted: Thu Jun 02, 2016 3:59 pm
by Gen52SS
SSSS :fight:

Re: Need CAM class info

Posted: Thu Jun 02, 2016 4:42 pm
by dewittpayne
Pickups are listed for CAM-C and CAM-S. They are not listed for CAM-T. Since CAM-C is 1990 and on, Mike is right and it's CAM-S.
CAM-S
Sports cars and sedans/coupes with seating originally for 2 or more adults and pickups.

Re: Need CAM class info

Posted: Thu Jun 02, 2016 5:14 pm
by MARKP
Nice truck! Look forward to seeing it run!

Sent from my SPH-L710 using Tapatalk

Re: Need CAM class info

Posted: Fri Jun 03, 2016 8:30 am
by michael.plaster
MARKP wrote:Nice truck! Look forward to seeing it run!

Yeah!

Re: Need CAM class info

Posted: Fri Jun 03, 2016 8:43 am
by Gen52SS
Slick68 wrote:The vehicle in question is a 68 Chevy C10 truck.

Image

This was my 68 Stepside just a 350 small block with a street cam

Image