2016 Points Update

[disneyd]

Points are posted at:

http://www.etrscca.org/soloresults/2016 ... points.htm

Take a look and let me know if you see any problems.... particularly in Pro.

Thanks

[jcox07]

Looks right to me.

[dewittpayne]

As far as I know, we don't have separate CAM class championships as well as a CAM PAX class, so the drivers listed under CAM-C, CAM-S and CAM-T should have points in the CAM PAX class and those separate class listings should be eliminated. Only Ben Davis in CAM-S doesn't have a line in the CAM PAX class.

[dewittpayne]

Joe Mefford should have 99.42 points in C "Classic American Muscle" for event #1 instead of 100.00 points in CAM-C.

For event #3, The points in C should be:

Driver raw PAX points
DeWitt Payne 51.133 42.900587 97.97
D. Larsen.. 50.395 42.02943 100.00
Brian LaRose 51.501 42.951834 97.85
D. Hamilton 55.792 46.530528 90.33
Ben Davis.. 52.877 44.839696 93.73

[disneyd]

So.... if I understand this correctly: There are no open CAM classes. I should go back and make sure all CAM cars are in the C index class. If I do that, will it correct everything Dewitt pointed out?

[disneyd]

Brian and Paul, please acknowledge if you see this:

We have two sets of CAM classes in the computer. A set with space (CAM T) and a set without (CAMT). I cam removing the set with spaces. Paul, we need to be sure MSR has no spaces in the CAM class names.

[TedV]

I was at event 6, like last year.

[disneyd]

I was at event 6, like last year.

What did we do last year?

[Gen52SS]

Brian and Paul, please acknowledge if you see this:

We have two sets of CAM classes in the computer. A set with space (CAM T) and a set without (CAMT). I cam removing the set with spaces. Paul, we need to be sure MSR has no spaces in the CAM class names.

I'm acknowledging seeing this and thought that this was an issue before which steps were taken to make all the corrections needed in MSR I will tomorrow take a long look at all our remaining events to make sure that changes I made are still in place and get back to you.

[disneyd]

I'm acknowledging seeing this and thought that this was an issue before which steps were taken to make all the corrections needed in MSR I will tomorrow take a long look at all our remaining events to make sure that changes I made are still in place and get back to you.

Yeah, you may have taken care of it already. I just want to be sure the classes with spaces don't come back in from MSR. I'm having to go through all the events and change the CAM driver's classes, as some are using the space and some not.

[Gen52SS]

Dave...I had to shut down MSR registration starting with event #8 because I found that the segments are correct but the Class Layout is GONE? I checked all remaining events which I corrected with help from Chris harp after event #3 issues. I need to work on this today and over the weekend and fix this again. I don't have logical explanation as to why 4 of the last 5 events are now missing the Class Layouts with corrected CAMC, CAMT and CAMS other then I never did them or something or someone deleted them. I also found that all the entry fee pricing has been changed as well to $40 for members $50 non member except for #11 Adesa which is correct @ $35 for everyone. When I fix these again I'll post up and let you know in Solo II Committee section of the forum as apposed to this points thread.

I found in remaining events #7 was set up correctly
Event #8 Segments correct Class Layout MISSING
Event #9 same
Event #10 same
Event #11 everything in this event is set up correctly
Event #12 back to missing Class Layout

Was fixed and looked like this



Now they are gone

[disneyd]

Ok, I've done another clean up run at the results and I think I've addressed everything. Take a look and lemme know.

[ConeEater]

Still not showing any points for me from Bristol national tour. Hopefully those points got into pro, not ssm

[jcox07]

They will go into pro Brian.

[disneyd]

Ok, I've updated event #4. Everyone check and let me know if Huber's times look correct in Event #4 and the Champ Points.