So here in a week or so I'm going to need to take the Miata to have an Autox/Track alignment done on it and would like to have it corner balanced as well.
So I was wondering if there was any specific place you guys would recommend where I could get this done for a reasonable price?
Alignment and Corner Balancing
- AcuraAttack
- Posts: 523
- Joined: Mon Apr 23, 2007 11:09 am
- Location: Knoxville, TN
Alignment and Corner Balancing
99 Mazda Miata 10AE, 26 STR NeVr 4gEt <3
06 Saab 92x Aero, Daily Driver/Duh new Hawt
"America is all about speed. Hot, nasty, bad-ass speed." - Eleanor Roosevelt, 1936.
Re: Alignment and Corner Balancing
John Brown was doing this last year. I would like to do this before the Adesa event also. I'd say he would be your best bet at setting up a Miata, he seems to have his sorted out pretty good. You still doing this John?
-
- Posts: 8798
- Joined: Fri Dec 05, 2003 11:05 am
Re: Alignment and Corner Balancing
yes..but.
I dont think there is no way I can do it before the Adesa event due to us thrashing to get ready to go to Watkins Glenn next Wednesday....
Does not look like Ill be at the Adesa event.
I dont think there is no way I can do it before the Adesa event due to us thrashing to get ready to go to Watkins Glenn next Wednesday....
Does not look like Ill be at the Adesa event.
ETR Pro Class Champion-2002-03-10-11-12-13-14-15
BMW/CCA D-Mod National Road Racing Champion-2011
Pro-Solo Prepared National Champ-2004
Pro-Solo Prepared National Champ-2005
2016 Dodge Challenger SRT 6.4L CAM-C
BMW/CCA D-Mod National Road Racing Champion-2011
Pro-Solo Prepared National Champ-2004
Pro-Solo Prepared National Champ-2005
2016 Dodge Challenger SRT 6.4L CAM-C
Re: Alignment and Corner Balancing
Try LNS.
Mark Pilson
03 Z06 - Sword
09 Mustang - Club
01 Excursion - The safe you dropped from the 10th story
03 Z06 - Sword
09 Mustang - Club
01 Excursion - The safe you dropped from the 10th story
- AcuraAttack
- Posts: 523
- Joined: Mon Apr 23, 2007 11:09 am
- Location: Knoxville, TN
Re: Alignment and Corner Balancing
JB was actually my first thought as well...oh well Watkins sounds a lot more fun than setting up my Miata Perhaps next season!
99 Mazda Miata 10AE, 26 STR NeVr 4gEt <3
06 Saab 92x Aero, Daily Driver/Duh new Hawt
"America is all about speed. Hot, nasty, bad-ass speed." - Eleanor Roosevelt, 1936.
Re: Alignment and Corner Balancing
I've been saying I'm going to do this before the next event for a year and a half, a guess I can wait a little longer. Good luck at Watkins Glenn.
-
- Posts: 136
- Joined: Sun May 09, 2004 11:03 am
- Location: Knoxville
Re: Alignment and Corner Balancing
If your interested, give me a call and we can discuss. I have been doing suspension set ups for solo and road racing for many years. (I had also sent you a PM earlier today)
Joe Henslee 288-4212
Joe Henslee 288-4212
Joe Henslee
Henslee Scorpion 2.0L Ford BSR-U2 CanAm (vintage) / Prototype 2 (SCCA) / BM(Solo)
Zink Z10 FF / CF (SCCA &vintage) / CM(Solo)
Reynard SF-84 2.0L Ford, Formula Continental FC / CFC (SCCA) / Formula Libre' (vintage)
USDRRT on eBay ....
Henslee Scorpion 2.0L Ford BSR-U2 CanAm (vintage) / Prototype 2 (SCCA) / BM(Solo)
Zink Z10 FF / CF (SCCA &vintage) / CM(Solo)
Reynard SF-84 2.0L Ford, Formula Continental FC / CFC (SCCA) / Formula Libre' (vintage)
USDRRT on eBay ....
- AcuraAttack
- Posts: 523
- Joined: Mon Apr 23, 2007 11:09 am
- Location: Knoxville, TN
Re: Alignment and Corner Balancing
Thanks Joe! I got your PM and I might have to take you up on the offer.
99 Mazda Miata 10AE, 26 STR NeVr 4gEt <3
06 Saab 92x Aero, Daily Driver/Duh new Hawt
"America is all about speed. Hot, nasty, bad-ass speed." - Eleanor Roosevelt, 1936.
Re: Alignment and Corner Balancing
This is an endorsement: Joe can do just about anything. He helped me years ago to align the chassis on my Sports Renault which involved moving some of the chassis points to make the chassis square(evidently they came off the chassis gig at SCCA in a warped form).
Wayne Henry
East Tenn Region, SCCA
2006 MX-5 Limited
the rest of the garage:
1984 Mazda RX-7 GSL-SE
1996 Toyota 4runner
East Tenn Region, SCCA
2006 MX-5 Limited
the rest of the garage:
1984 Mazda RX-7 GSL-SE
1996 Toyota 4runner
Re: Alignment and Corner Balancing
They are known as Spec 'Recker's, they come from the factory pre-wrecked. They are just gonna get crashed anyway. some have been crashed and repaired better than others.whenry wrote:This is an endorsement: Joe can do just about anything. He helped me years ago to align the chassis on my Sports Renault which involved moving some of the chassis points to make the chassis square(evidently they came off the chassis gig at SCCA in a warped form).
Ted V.
don't make me list all my VW's
don't make me list all my VW's