Page 1 of 2
Speed Sport Engineering Dyno Weekend
Posted: Sat Jan 17, 2004 7:15 pm
by Don Ramsay
We are goind to having a
Dyno Weekend. It's going to be a 2 dayer it will be held on Jan. 31 and Feb 1.
The deal will be $50 for 3 pulls
with the wideband, a $20 savings. Post here if you are going to dyno, and witch day you want to run.
Every one is also welcome to come watch. Sat. the 31 it will start at 9 AM till 5 PM and Sun.1st starts at 1 PM till 6 PM or till all who want to dyno are done.
Tunning will be avalible as well.
If you have any questions plesae call or EM Tiffany at
Grrrlpwr77@aol.com or 777-DYNO
So come on down and join in on the fun!!
Thanks!!
Posted: Sat Jan 17, 2004 9:05 pm
by whenry
I was going to approach you, Don, about arranging such a deal for ETR and this one is a double whammy on my birthday and the Superbowl but now I have another reason to work on the SpecMiata.
Sat for me!
Dyno Time!!!
Posted: Tue Jan 27, 2004 7:49 am
by John Brown
Hey Don, I will have the toyota there for sure Sat.
Who all is gonna be there guys??? this is a deal!
Re: Dyno Time!!!
Posted: Tue Jan 27, 2004 7:55 am
by MARKP
John Brown wrote:Hey Don, I will have the toyota there for sure Sat.
Who all is gonna be there guys??? this is a deal!
Unfortunately, this one is too early in the season for me. My cars are currently in pieces. One of them doesn't even have paint on it. Any chance of doing another one in late spring?
Early??
Posted: Tue Jan 27, 2004 8:00 am
by John Brown
Might I remind you.....Pro-Solo...Atlanta.....2 weeks...
better get to twistin wrenches...
Re: Early??
Posted: Tue Jan 27, 2004 9:11 am
by MARKP
John Brown wrote:Might I remind you.....Pro-Solo...Atlanta.....2 weeks...
better get to twistin wrenches...
I have an alternate plan...
Posted: Tue Jan 27, 2004 12:56 pm
by ConeJunkie
I have to come down and check it out. No need to dyno my car, I know it's power house
Re: Dyno Time!!!
Posted: Wed Jan 28, 2004 9:33 am
by steverife
when do you guys who are dynoing plan on being there?
Posted: Wed Jan 28, 2004 9:46 am
by John Brown
i WILL HAVE TO BE THERE EARLY...BEFORE 10 AM
Posted: Wed Jan 28, 2004 10:27 am
by whenry
I emailed Tiffany asking for a time slot and have not heard back. Early is better for me but I will defer to JB as to priority. I mainly want to do exhaust testing so I will need time to swap out pipes. It hurts just thinking about it. I might try to save time by driving the SM on the backroads to the dyno but if it is real cold, I'll have to drag the trailer since I dont have a heater or drivers side window.
Posted: Fri Jan 30, 2004 9:03 pm
by TennLee
Russ Buckner and I plan on going around 11am. Don't know if we can get my Fiat dynoed, but we're gonna try! We don't have an official timeslot.
Posted: Sat Jan 31, 2004 1:39 pm
by John Brown
35 MIN. $50 AND 11 HP GAIN......I'LL TAKE IT!!!
So thats why them little screws are in the cam pulleys.....
Posted: Sat Jan 31, 2004 1:42 pm
by scottgib
John,
Just curious, what did the valve timing change do to your bottom end torque? And do you really care?
Posted: Sat Jan 31, 2004 2:53 pm
by John Brown
My max torque went from 5200 rpm's to 6700 rpm's.But it's a flat plain from 4700 to 6700 now,where it did peak and fall before. Before my hp was still going up...but the torque was falling off. Now the torque and the hp start to fall almost at the same time,about 7200 rpm.
Who knows how it will dyno on the "seat-o-the pants" dyno......
Posted: Sat Jan 31, 2004 3:45 pm
by scottgib
Hummmm,
Now you are going to beat everyone else even more!!
We are all pulling for you to kick some ass on a national level this year.
2+ NC's maybe for ETR??!!