Page 1 of 1
Plastic Welding
Posted: Sat Feb 20, 2016 9:11 pm
by oldmuscle69
Anyone have the in's and out's of plastic welding? So far I have learned a few things about the shaping of the heated plastic. Wondering about the best way to connect seams and joints and am working on a jig type deal for holding the parts to be welded.Thanks for your help.
Re: Plastic Welding
Posted: Sat Feb 20, 2016 9:56 pm
by RxCritical
What does this have to do with swinger clubs?
Re: Plastic Welding
Posted: Sat Feb 20, 2016 10:28 pm
by oldmuscle69
not a thing,now get double letters Effen cat just knocked over my Pop onto the key board.Might have to buy a new lap top now.
Re: Plastic Welding
Posted: Sat Feb 20, 2016 11:12 pm
by oldmuscle69
Now back to this subject, I would like input on this topic.
Re: Plastic Welding
Posted: Sun Feb 21, 2016 8:31 pm
by CobraJim
I always have IPW (industrial plastics warehouse) do all my welding. If you want to know the tricks they're the people to ask...
Re: Plastic Welding
Posted: Sun Feb 21, 2016 9:45 pm
by oldmuscle69
Are they in town or where are they?
Re: Plastic Welding
Posted: Mon Feb 22, 2016 8:25 pm
by CobraJim
K-town
Re: Plastic Welding
Posted: Mon Feb 22, 2016 8:26 pm
by CobraJim
Off of Amherst as I recall
Re: Plastic Welding
Posted: Thu Feb 25, 2016 10:52 pm
by oldmuscle69
Do they have a phone number?
Re: Plastic Welding
Posted: Fri Feb 26, 2016 7:46 am
by CobraJim
Industrial plastic works
6220 enterprise Dr.
Knoxville, Tn. 37909
(865) 546-9422
Re: Plastic Welding
Posted: Fri Feb 26, 2016 4:56 pm
by 72RatCamaro
What are you welding? I have worked with a Nitrogen welder a little bit here at the shop, but nothing too crazy.
Re: Plastic Welding
Posted: Sun Feb 28, 2016 10:18 pm
by oldmuscle69
Working on some tubing and bends that will need welded, I have access to a bunch of plastic sheets that are being thrown away.They heat up in the oven and I can bend them and roll them,just want to know how to seal the seams.